13. Adjusting the Altitude Offset

If your landing area is at a different altitude to the location you will take off from, you can adjust the altitude offset by following these instructions:

  • Tap Menu > Jump Config > Alti Offset
Landing Offset Screen

  • Enter the altitude offset by tapping the -10 and +10 buttons to add or remove feet or meters
Offset - higher than landing area

Offset - lower than landing area

  • tap 'Save' to apply your changes - the status at the bottom of the screen will now change showing the saved offset

Once saved here is what the screen will look like on the ground and in the air -

Home screen with saved altitude offset

Plane mode with altitude offset